Search found 5463 matches
- Mon Jun 22, 2009 9:02 pm
- Forum: Pro Audio Design
- Topic: another active Summing Mixer designed for my needs
- Replies: 5
- Views: 12639
Re: another active Summing Mixer designed for my needs
What John said WRT the differential impedance values being on the low side with the values shown. I hadn't really thought about it before but radiance makes a very good point about why a 1200-series (InGenius) should be used. If you're going to use a U-pad with InGenius, like you've shown in the dra...
- Mon Jun 22, 2009 8:50 pm
- Forum: Build
- Topic: 1510 -- servo, or not ?
- Replies: 24
- Views: 75014
Re: 1510 -- servo, or not ?
Hi Chris -
I would still put a 200/220 pF across pins 2 and 3 of the 1510/12 near the device leads.
Wayne
I would still put a 200/220 pF across pins 2 and 3 of the 1510/12 near the device leads.
Wayne
- Sat Jun 13, 2009 1:29 pm
- Forum: The Peabody Lounge
- Topic: This is me! [new member introduction] warning! loong post
- Replies: 17
- Views: 29321
- Sat Jun 13, 2009 1:16 pm
- Forum: The Peabody Lounge
- Topic: This is me! [new member introduction] warning! loong post
- Replies: 17
- Views: 29321
Re: This is me! [new member introduction] warning! loong post
I wished there were more clocks. These used a very early AMI clock chip that was probably one of the first on the market. It had LCD drive capability but the display was 7 segment incandescent. There was a company at the time that made incandescent 7 segment displays in DIP packages so the clock use...
- Sat Jun 13, 2009 12:58 pm
- Forum: The Peabody Lounge
- Topic: This is me! [new member introduction] warning! loong post
- Replies: 17
- Views: 29321
Re: This is me! [new member introduction] warning! loong post
http://www.ka-electronics.com/Images/jpg/KA_Clock_Case_1.JPG http://www.ka-electronics.com/Images/jpg/KA_Clock_Case_2.JPG I think these were made around 1971-1972. I noticed that the lip behind the bezel was made by cutting away material over the full length of the inside. For the basic "tube&...
- Sat Jun 13, 2009 12:39 pm
- Forum: The Peabody Lounge
- Topic: This is me! [new member introduction] warning! loong post
- Replies: 17
- Views: 29321
Re: This is me! [new member introduction] warning! loong post
Hey I'll go look for the clocks right now. They may also be in off-site storage. On the CD: Thanks for sharing the 64MB/download bandwidth! I took the MP3s and burnt them directly to CD. Temporarily I'm driving my wife to work and we "commuted" with your album. It's awesome! I guess the me...
- Tue Jun 09, 2009 2:11 pm
- Forum: The Peabody Lounge
- Topic: This is me! [new member introduction] warning! loong post
- Replies: 17
- Views: 29321
Re: This is me! [new member introduction] warning! loong post
Roger - Yes I downloaded it last night, burnt an mp3 CD and took it on the morning commute.
Foona - Wow dude, this stuff is really good!
BTW I used Free RAR Extract Frog for WinXP since my RAR utilities are on the Linux machine.
Another 5 thumbs!
Foona - Wow dude, this stuff is really good!
BTW I used Free RAR Extract Frog for WinXP since my RAR utilities are on the Linux machine.
Another 5 thumbs!
- Sat Jun 06, 2009 11:20 am
- Forum: Pro Audio Design
- Topic: Mid Side M-S Matrix Uses No Precision Resistors
- Replies: 271
- Views: 630693
Re: Mid Side M-S Matrix Uses No Precision Resistors - Boards 5/1
Back when we were in layout stage I sent Bob Katz a link to the thread and he suggested that we put insert points between virtually all of the stages. So we did. After getting boards I sent Bob one to see what he thought. He saw uses for it I had completely overlooked. One of the ideas he had was to...
- Sat Jun 06, 2009 11:04 am
- Forum: The Peabody Lounge
- Topic: This is me! [new member introduction] warning! loong post
- Replies: 17
- Views: 29321
Re: This is me! [new member introduction] warning! loong post
Yes, that's it exactly. The saw cut adds a nice touch. I'll dig out one of the clock cases and post it. I think 700 pix wide is about right. You can post larger images but they introduce a scroll bar. I try to limit mine to around 600-700 but when I have larger images I usually link to them. Sometim...
- Sat Jun 06, 2009 9:40 am
- Forum: The Peabody Lounge
- Topic: This is me! [new member introduction] warning! loong post
- Replies: 17
- Views: 29321
Re: This is me! [new member introduction] warning! loong post
In the image for Ucapps Midibox64 - "Dubmasta" in the upper left-hand corner there is a box that looks to be a power supply in a wooden case. When I first looked at that picture I immediately noticed what appears to be a double saw kerf at each end. Is that what that is? Back in the early ...