Using the Precision MS Matrix for Mono Crossover LF Blending

Where we discuss new analog design ideas for Pro Audio and modern spins on vintage ones.
User avatar
mediatechnology
Posts: 5444
Joined: Sat Aug 11, 2007 2:34 pm
Location: Oak Cliff, Texas
Contact:

Re: Using the Precision MS Matrix for Mono Crossover LF Blen

Post by mediatechnology »

The best vectorscope for audio is the NTP in the CRT Danner cassette that was in the Neumann consoles. They have log amplifier inputs so they scale audio nicely.
Thanks Paul. I hadn't thought about using a log amp for X-Y display but it seems like a very nice touch.
I think old CRTs are going to be very difficult to source other than salvaging them from old 'scopes bought on eBay.
Gold
Posts: 678
Joined: Sat Dec 01, 2007 5:20 pm

Re: Using the Precision MS Matrix for Mono Crossover LF Blen

Post by Gold »

The CRT is only a couple of inches around. The image has to fill the screen no matter the level because there isn't much display room. I have the documentation around somewhere. I'll see if I can dig it out.
Gold
Posts: 678
Joined: Sat Dec 01, 2007 5:20 pm

Re: Using the Precision MS Matrix for Mono Crossover LF Blen

Post by Gold »

I took a look around but couldn't find the NTP docs. When I run across them I;ll post them.
Post Reply