Yes I looked at the 626x a few times. Most recently I didn't like the low-ish gain, no servo and, worse distortion figures on the preamp than the 1580. Thinking about it now, I could fit 2 470uF 10v cg's on a preamp card since I would only need 2 or 3 cards, 39/34 db gain is probably ok, but maybe with some dynamics mics maybe not. Distortion figures, not sure if that's audible, but I do really like the lme49720 op amps and probably because of their low distortion.
I was almost going to post a few weeks ago and ask you about how to do a differential servo for it.
That1580 mini mixer
- mediatechnology
- Posts: 5155
- Joined: Sat Aug 11, 2007 2:34 pm
- Location: Oak Cliff, Texas
- Contact:
Re: That1580 mini mixer
It looks like you'd have to servo into the input bases since one emitter has Rg in series.
- mediatechnology
- Posts: 5155
- Joined: Sat Aug 11, 2007 2:34 pm
- Location: Oak Cliff, Texas
- Contact:
Re: That1580 mini mixer
I think this may be relevant:
"Analog And Digital Gain In Microphone Preamplifier Design," Fink And Bortoni, THAT Corporation, Presented at the 153rd Convention
2022 October.
https://proaudiodesignforum.com/images/ ... T_Corp.pdf
"Analog And Digital Gain In Microphone Preamplifier Design," Fink And Bortoni, THAT Corporation, Presented at the 153rd Convention
2022 October.
https://proaudiodesignforum.com/images/ ... T_Corp.pdf