Phoenix Connector Terminations

Construction information for DIY projects, including the MS Mid Side Matrix, Elliptic Equalizer, Mastering Console, Phono Transfer System, Insert Switcher and the Dual Class-A Amplifier. You can post your baby pictures here.
Post Reply
User avatar
mediatechnology
Posts: 3849
Joined: Sat Aug 11, 2007 2:34 pm
Location: Oak Cliff, Texas
Contact:

Phoenix Connector Terminations

Post by mediatechnology » Mon Apr 09, 2018 7:32 am

I terminate the shielded twisted pair to three pin male header connections:

Image
Use a multi-pin male header for connections to Phoenix connectors.

That makes connecting and disconnecting the Phoenix connections easier.
https://ka-electronics.com

VIDEO: "Antifa Viciously Attacks Little Girl [in Portland] Plus Leaked NY Times Documents Shock The World" https://www.infowars.com/watch/?video=5 ... 0017211639
Project Veritas: Google "Machine Learning Fairness" Whistleblower Goes Public, says: "burden lifted off of my soul." https://www.youtube.com/watch?v=g1VeElB ... e=youtu.be
If banned by YouTube: https://www.bitchute.com/video/g1VeElBAeas/

User avatar
JR.
Posts: 2877
Joined: Sat May 24, 2008 7:21 pm
Contact:

Re: Phoenix Connector Terminations

Post by JR. » Mon Apr 09, 2018 3:20 pm

I always thought Phoenix connectors were screw capture loose wire. like Image

That almost looks like an amp/molex whatever header.

JR
Visit https://circularscience.com to hear what properly "cleared" drums sound like.

User avatar
mediatechnology
Posts: 3849
Joined: Sat Aug 11, 2007 2:34 pm
Location: Oak Cliff, Texas
Contact:

Re: Phoenix Connector Terminations

Post by mediatechnology » Mon Apr 09, 2018 3:26 pm

They are Molex Centigrid-III headers.

You insert the header into the Phoenix connector and use it as a ferule.

Image

If the crimp tools for Molex KK or Centrigrid-III weren't $400 each I would use them.
Phoenix are more DIY-friendly.
https://ka-electronics.com

VIDEO: "Antifa Viciously Attacks Little Girl [in Portland] Plus Leaked NY Times Documents Shock The World" https://www.infowars.com/watch/?video=5 ... 0017211639
Project Veritas: Google "Machine Learning Fairness" Whistleblower Goes Public, says: "burden lifted off of my soul." https://www.youtube.com/watch?v=g1VeElB ... e=youtu.be
If banned by YouTube: https://www.bitchute.com/video/g1VeElBAeas/

Gold
Posts: 558
Joined: Sat Dec 01, 2007 6:20 pm

Re: Phoenix Connector Terminations

Post by Gold » Mon Apr 09, 2018 3:52 pm

You can use a generic barrel crimper for Molex KK. So more like $20 on the bay. I’m not a big fan of Molex KK. When the connector is seated it still can move around a bit. That makes me nervous. I love the Phoenix connectors. I replace Molex KK with phoenix connectors whenever I can. The relay switcher I have used the type above where the wires are secured by screws to the female part of the connector.

Gold
Posts: 558
Joined: Sat Dec 01, 2007 6:20 pm

Re: Phoenix Connector Terminations

Post by Gold » Mon Apr 09, 2018 4:02 pm

I get ferrules from McMaster-Carr. They are much less expensive than Mouser for some reason.
https://www.mcmaster.com/?m=true%20Forc ... s/=1ccblw5

I use a Wiha crimp pliers
https://www.wihatools.com/softgrip-crimping-pliers

User avatar
JR.
Posts: 2877
Joined: Sat May 24, 2008 7:21 pm
Contact:

Re: Phoenix Connector Terminations

Post by JR. » Mon Apr 09, 2018 4:14 pm

Gotcha,,, neater and faster than tinned wire leads for bench work.

JR
Visit https://circularscience.com to hear what properly "cleared" drums sound like.

User avatar
mediatechnology
Posts: 3849
Joined: Sat Aug 11, 2007 2:34 pm
Location: Oak Cliff, Texas
Contact:

Re: Phoenix Connector Terminations

Post by mediatechnology » Mon Apr 09, 2018 4:37 pm

I'm not crazy about the Molex KK either.
I've had to repair bad crimps in a lot of commerically-produced gear using them.

I started using the headers for my test jigs.
https://ka-electronics.com

VIDEO: "Antifa Viciously Attacks Little Girl [in Portland] Plus Leaked NY Times Documents Shock The World" https://www.infowars.com/watch/?video=5 ... 0017211639
Project Veritas: Google "Machine Learning Fairness" Whistleblower Goes Public, says: "burden lifted off of my soul." https://www.youtube.com/watch?v=g1VeElB ... e=youtu.be
If banned by YouTube: https://www.bitchute.com/video/g1VeElBAeas/

Gold
Posts: 558
Joined: Sat Dec 01, 2007 6:20 pm

Re: Phoenix Connector Terminations

Post by Gold » Mon Apr 09, 2018 4:50 pm

JR. wrote:
Mon Apr 09, 2018 4:14 pm
Gotcha,,, neater and faster than tinned wire leads for bench work.

JR
If you leave the wire bare the strands spread when you tighten the screw making poor contact. If you tin the wire it becomes brittle and easily breaks. The ferrules allow good contact and provide strain relief.

User avatar
mediatechnology
Posts: 3849
Joined: Sat Aug 11, 2007 2:34 pm
Location: Oak Cliff, Texas
Contact:

Re: Phoenix Connector Terminations

Post by mediatechnology » Mon Apr 09, 2018 5:08 pm

If you leave the wire bare the strands spread when you tighten the screw making poor contact. If you tin the wire it becomes brittle and easily breaks. The ferrules allow good contact and provide strain relief.
And if you do either of those things more than once the conductors look really torn up and mangled.
https://ka-electronics.com

VIDEO: "Antifa Viciously Attacks Little Girl [in Portland] Plus Leaked NY Times Documents Shock The World" https://www.infowars.com/watch/?video=5 ... 0017211639
Project Veritas: Google "Machine Learning Fairness" Whistleblower Goes Public, says: "burden lifted off of my soul." https://www.youtube.com/watch?v=g1VeElB ... e=youtu.be
If banned by YouTube: https://www.bitchute.com/video/g1VeElBAeas/

Post Reply